Reference Waypoints - Garmin Personal Navigator GPS 45XL Owner's Manual & Reference

Reference Waypoints

To create a new waypoint manually without knowing its
position coordinates, you'll need to enter its bearing and
distance from an existing waypoint. The GPS 45XL will
then calculate the position coordinates for you.
To create a new waypoint by referencing a stored
waypoint:
U
1. Press until the 'NEW?' field is highlighted.
E
2. Press .
3. Enter the name of your new waypoint.
E
4. Press the
The position field will now become highlighted, with the
receiver's last known position shown.
D
5. Press to move the cursor to the reference field.
E
6. Press to begin entry of the reference waypoint.
7. Use the arrow keypad to enter the waypoint name.
E
8. Press the
9. Enter the bearing and distance of your new waypoint from
the reference waypoint. Remember to use the
to begin entry and confirm each field. The coordinates will
be calculated and saved for your new waypoint.
E
10. Press the
return to the menu page.
key to confirm the waypoint name.
key to confirm your entry.
key (with the 'done' field highlighted) to
The GPS 45XL' s advanced
waypoint and planning fea-
tures allow you to create
new waypoints and practice
navigation without ever
setting foot outside.
If you create a new way-
point by entering coord i-
nates from a map, you may
want to remark the way-
point's exact position once
you get there.
To re-define an existing
waypoint's position coordi-
nates from the waypoint
definition page, simply
highlight the DST field and
p ress ENTER. Use the
LEFT arrow key to set the
distance to 0.00, and press
E
key
ENTER to confirm.
The old coordinates will be
replaced by the coordinates
of your present position
(you must have a valid 2D
or 3D position fix).
Reference
Creating &
Using
Waypoints
25