Cursor And Fields; Keypad Operation; Banners - Garmin GPS 50 Owner's Manual

2.3 CURSOR AND FIELDS

Alphanumeric Field
The area of the page which is underlined is called the cursor. The cursor
may be moved to locations on the page called fields which allow you to enter
data. You will encounter four types of fields.
· Numeric fields accept numbers. For example, you will enter a
waypoint's latitude in a numeric field.
· Alphanumeric fields accept numbers as well as letters. For example,
you will enter a waypoint's name in an alphanumeric field.
· Cyclic fields allow you to select from one of several available options.
For example, you may select between DTK (desired track), BRG
(bearing to waypoint), or CTS (course to steer) using a cyclic field.
Cyclic fields are indicated on the display by the " MORE" banner.
· Confirmation fields allow you to indicate your approval. For example,
you will be asked to confirm that you want to delete a waypoint.
Confirmation fields always end with a " ?" character.

2.4 KEYPAD OPERATION

The PWR/BRT key is a dual function key that controls unit power
and panel backlighting.
When the unit is on, pressing the PWR/BRT key will turn on the
panel backlighting. Pressing the PWR/BRT key again will turn off
the backlighting.
To turn the unit off, press and hold the PWR/BRT key for three
seconds until the display is blank.
Cursor on
Confirmation Field
Numeric Field Cursor on Cyclic Field
2-3