Table of Contents
Advertisement
To view phone content on a TV using a HDMI cable connection
1
Connect your phone to the TV set using a HDMI™ cable.
phone's status bar after a connection is established.
2
The TV launcher application starts automatically. Follow the instructions on
your phone screen to view your media files on the TV.
You may need to purchase a TypeD HDMI™ cable separately. For best results, use a Sony
IM-820 cable.
To view help about using the TV remote control
1
Drag the status bar downwards to open the Notification panel while the
HDMI™ cable is connected to both your phone and the TV set.
2
Tap HDMI connected to view instructions on how to use the control buttons
on your TV's remote control.
You can also press the yellow button on the TV remote control to open the Notification panel.
Compatible with BRAVIA Sync enabled devices. Limited functionality supported on most
HDMI™ enabled TV's.
To disconnect your phone from the TV set
•
Disconnect the HDMI™ cable from your phone or the TV set.
Smart Connect
About Smart Connect
Use the Smart Connect application to set what happens in your device when you
connect or disconnect an accessory. You can also use it to set a specific action or a
group of actions to launch on your device at certain times of the day.
For example, when you connect your headset or headphones, you can set an event
so that the following actions are launched on your device:
•
Between 7am and 9am, when you commute to work, the WALKMAN player starts,
and the web browser opens the morning paper. The ring volume is set to vibrate.
•
Between office hours, a conference call app opens on your device.
•
On the way back from work, the FM radio starts, and a notes app with your shopping
list opens.
To start the Smart Connect application
1
From your Home screen, tap
2
Find and tap Smart Connect.
To create a Smart Connect event
1
Start the Smart Connection application. If you are opening Smart Connect for
the first time, tap OK to close the introduction screen.
2
On the Events tab, tap
3
Give the event a name, then tap Create.
4
Under When, add either an accessory or a time interval, or both.
5
Under Do this, add what you want to happen in your device.
6
Under At the end, add what you want to happen when you disconnect the
accessory or when the time interval comes to an end. If both these conditions
are set, the actions start either when you disconnect the accessory, or when
the time interval comes to an end.
7
To save the event, press
To add a Bluetooth™ accessory, you have to first pair it with your device.
This is an Internet version of this publication. © Print only for private use.
.
.
.
102
appears in your
Advertisement
Table of Contents
