Brother MFC-J245 Quick Setup Manual page 3

c
Connect the telephone line cord.
Connect one end of the telephone line cord to
the socket marked LINE on the machine.
Carefully guide the telephone line cord into the
cable channel and out the back of the machine.
Connect the other end to a modular wall
socket.
IMPORTANT
The telephone line cord MUST be connected to
the socket marked LINE on the machine.
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c using
both hands.
CAUTION
Be careful not to pinch your fingers when the
scanner cover closes.
1
3
3
2
NOTE
If you are sharing one telephone line with an
external telephone, connect it as shown below.
a Extension telephone
b External telephone
NOTE
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Set the receive mode to External TAD if you
have an external answering machine. See
Choose a Receive Mode on page 9. Detailed
information uuBasic User's Guide: Connecting
an external TAD (telephone answering device)
1
2
(Example for Australia)
(Example for Australia)
3