Waypoint Symbols; Waypoint Comments - Garmin GPS 12XL Owner's Manual & Reference

Reference Waypoints (cont.)
3. Highlight the 'REF' field, and press
4. Enter a reference waypoint name (or leave the field
blank to use your present position), and press
5. Enter the bearing and distance of your new waypoint
from the reference waypoint.
E
6. Press to confirm the 'DONE?' prompt.

Waypoint Symbols

The GPS 12XL allows you to select one of 16 sym-
bols for each waypoint for easy recognition on the map
display. From the symbol page, you may also select
how the waypoint appears on the map.
To select a waypoint symbol:
1. Highlight the symbol field, and press
2. Use the arrow keypad to select the desired symbol,
E
and press
3. The cursor will move to the display field, where you
can select which waypoint information is displayed
on the map.
E
4. Press , and select one of the following display
options: 'NAME WITH SYMBOL', 'SYMBOL ONLY,' or
'COMMENT WITH SYMBOL'.
E
5. Press to confirm your selection, and
again to confirm the 'DONE?' prompt.

Waypoint Comments

Each waypoint stored in the GPS 12XL has a user-
defined 16-character comment field. The default com-
ment is the UTC (or Greenwich mean time) date and
time of the waypoint' s creation.
To change or add a comment:
1. Highlight the comment field.
E
2. Press .
Note: You can clear the comment field by press-
ing the left side of the rocker keypad.
3. Enter the desired comment.
E
4. Press .
E
E
.
.
E
.
.
E
REFERENCE
Waypoint
Symbols &
Comments
Waypoint symbols enable
you to instantly get more
information about a way-
point than just its name.
The waypoint comment
field will automatically
assign the date and time of
creation to the waypoint
comment field. You may
enter a 16-character user
comment at any time.
21