Re
versing the door of your appliance
This proc
is attached.
Any parts that you remove from the appliance whilst
reversing the door, should be
Tools required:-
o Phillips screwdriver
o Flat blade
d screwdriver
N
ote: This diagram is for reference only. The following
procedure must be followed for both of the appliance doors.
o Slacken the retaining screws (1) on the appliance and then
carefully remove the appliance door.
o Place the appliance door on a cushioned surface, so that damage
does not occur to it.
Lever off the cover caps (3).
o
edure MUST be completed before the furniture door
retained for later use.
22