Internal Lan Jack - Fujitsu LifeBook U772 User Manual

Internal LAN Jack

The internal LAN (RJ-45) jack is used for a
10/100/1000 Gigabit Ethernet LAN
connection. You may need to configure your
Ultrabook to work with your particular
network. (Please refer to your network
administrator for information on your
network configuration.) To connect the LAN
cable follow these easy steps:
Locate the LAN Adapter that is included
1
with your system (Figure 25).
Align the LAN cable plug with the LAN
2
cable port on the side of the adapter,
then push the connector into the port
until it is seated.
Align the adapter plug with the LAN port
3
on the right side of the system (see
Figure 4 for location), then push the
adapter plug into the LAN port until it is
seated.
Plug the other end of the LAN cable into
4
a LAN outlet.
LAN Cable Port
Figure 25. LAN Adapter (side view)
LAN Port
LAN Cable
Figure 26. Connecting a LAN
52 - Device Ports
Adapter
Plug
LAN Adapter