Daikin RXS30LVJU Installation Manual page 11

Wiring
<Method of mounting conduit>
Pass wires through the conduit and secure them with a lock nut.
Lock nut
D Binding band
(Accessory)
C Tube
(Accessory)
Observe the notes mentioned following when wiring to the power supply terminal block.
Precautions to be taken for power supply wiring.
10
Service port
Conduit mounting plate
Conduit
1/2 inch (21.3mm)
Secure the wires firmly
using the binding band, as
shown in the figure.
Secure firmly, making sure
no outside pressure is
exerted on the terminals.
Wire retainer
Conduit mounting plate
Power supply terminal block
L
1 2 3 1
• Use the specified wires and
connect them securely.
• Shape the wires so that there
is no lifting of the service hatch
or other structural parts.
L
2
■
English