Daikin FTXS30HVJU Operation Manual page 22

ATTENTION
In the following cases, set the timer again.
•
After a breaker has turned OFF.
•
After a power failure.
•
After replacing batteries in the remote controller.
To use ON TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time.
1.
Press
" " is displayed.
" " blinks.
" • " and day of the week disappears from LCD.
2.
Press until the time setting reaches the point
you like.
• Every pressing of either button increases or decreases the time setting by 10 minutes. Holding
down either button changes the setting rapidly.
3.
Press
" • " and setting time are displayed on the LCD.
• The TIMER lamp lights up.
Control panel
To cancel OFF TIMER Operation
Press
" • " and setting time disappears from LCD.
" • " and day of the week are displayed on the LCD.
• The TIMER lamp goes off.
To combine ON TIMER and OFF TIMER
• A sample setting for combining the 2 timers is shown below.
(Example)
Present time: 23:00 (The unit operating)
OFF TIMER at 0:00
Combined
ON TIMER at 14:00
Page 9
.
again.
.
21