Utc Offset Chart - Garmin eTrex Vista C color map navigator Owner's Manual

This chart is provided to help you determine the time offset settings
for your current location if it is not in one of the time zones listed on the
Time Setup Page. To change the UTC Offset, access the Main Menu, then
Setup and then open the Time Setup Page. Highlight the Time Zone field
and press the ENTER to display the list of time zones. If the desired zone
is not displayed, select "Other." Highlight the UTC Offset field and press
ENTER to enter the appropriate offset value from the chart below. To
determine your longitudinal zone, press and hold the ENTER key and
observe the longitude value in the Mark Waypoint Page Location field. It
should fall within the sets of values on the chart. Press the QUIT key to
avoid marking a waypoint.
Longitudinal Zone
W180.0° to W172.5°
W172.5° to W157.5°
W157.5° to W142.5°
W142.5° to W127.5°
W127.5° to W112.5°
W112.5° to W097.5°
W097.5° to W082.5°
W082.5° to W067.5°
W067.5° to W052.5°
W052.5° to W037.5°
W037.5° to W022.5°
W022.5° to W007.5°
W007.5° to E007.5°
Offset
-12.00
-11.00
-10.00
-09.00
-08.00
-07.00
-06.00
-05.00
-04.00
-03.00
-02.00
-01.00
-
eTrex Vista C
Appendix

UTC Offset Chart

00.00
Longitudinal Zone Offset
E007.5° to E022.5° +01.00
E022.5° to E037.5° +02.00
E052.5° to E067.5° +03.00
E067.5° to E082.5° +04.00
E082.5° to E097.5° +05.00
E097.5° to E112.5° +06.00
E112.5° to E122.5° +07.00
E122.5° to E127.5° +08.00
E127.5° to E142.5° +09.00
E142.5° to E157.5° +10.00
E157.5° to E172.5° +11.00
E172.5° to E180.5° +12.00
87