Display Setup; Interface Setup - Garmin eTrex Vista Cx Owner's Manual

M M > S M
AIN ENU ETUP ENU

Display Setup

Use the Display Setup Page to
select a screen color scheme for
day and night viewing. You can
set the backlight timeout and the
level of brightness to save on
battery power.
To access the Display Setup Page:
On the Setup Menu Page, highlight the
Display icon, and press Enter.
• Display Mode—sets the display to Day, Night,
or Auto mode. Select Auto to automatically
switch from day to night at sunset and change
back at sunrise.
• Daytime Color Scheme and Nightime Color
Scheme—sets the color scheme to use when
operating in Day or Night mode.
• Backlight Timeout—sets the backlight to stay
on when it is turned on, or to time out after a
selected period of time has elapsed when using
the battery. The backlight stays on regardless of
this setting when external power is used.
68
• Backlight Level—turns the backlight up or
down. Press up on the Rocker to increase the
intensity or down to decrease.

Interface Setup

Use the Interface Setup Page
to transfer data to or from the
microSD card contained in your
unit.
To access the Interface
Setup Page:
On the Setup Menu Page, highlight the
Interface icon, and press ENTER to display
the page. If the USB cable is connected to
a PC and the unit, a "Connected" message
appears on the page.
USB Mass Storage—allows
the microSD card to be used as
a USB Mass Storage device. It
also allows transfer of Track Log
Data to Garmin MapSource and
detailed map data transfer.
eTrex Vista Cx Owner's Manual