Paper Feeding Problems; Paper Jam Problems - Epson XP-400 User Manual

Paper Feeding Problems

If you have problems feeding paper, try these solutions:
• If paper does not feed for printing, remove it. Then reload it in the sheet feeder against the right side
and beneath the tab. Slide the edge guide against the edge of the paper, making sure that the paper
stack is not above the arrow mark on the edge guide.
• If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.
• If paper jams when you load only one or two sheets, try loading more sheets at a time. Do not load
more than the recommended number of sheets.
• If paper jams when you print on both sides of the paper, try loading fewer sheets.
• For best results, follow these guidelines:
• Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick.
• Load paper in the sheet feeder printable side up.
• Follow any special loading instructions that came with the paper.
Parent topic:
Related references

Paper Jam Problems

Paper Loading Capacity
Related topics
Loading Paper
Paper Jam Problems
If you have problems with paper jams, try these solutions:
1. Cancel the print job from your computer, if necessary.
2. Gently pull out any jammed paper from the output tray and sheet feeder.
3. Press the
the next step.
4. Press the
5. Lift up the scanner unit, and remove the jammed paper and any torn pieces.
Solving Paper Problems
start button to resume printing. If the product messages still show an error, continue with
power button to turn the product off.
180