Solving Copying Problems; Product Makes Noise, But Nothing Copies; Product Makes Noise When It Sits For A While; Solving Paper Problems - Epson WorkForce 545 User Manual

4. Press one of the
(Press the
Examine the settings shown on the network status sheet to diagnose any problems you have.
Parent topic:

Solving Copying Problems

Check these solutions if you have problems copying with your product.

Product Makes Noise, But Nothing Copies

Product Makes Noise When It Sits for a While

Parent topic:
Product Makes Noise, But Nothing Copies
If your product makes a noise, but nothing copies, try these solutions:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• If the nozzle check page does not print, but the product's On light is on, make sure your product
software is installed correctly.
• Make sure your product is level (not tilted).
Parent topic:
Related concepts
Print Head Nozzle Check
Print Head Cleaning
Product Makes Noise When It Sits for a While
Your product is performing routine maintenance. This is normal.
Parent topic:

Solving Paper Problems

Check these sections if you have problems using paper with your product.
Paper Feeding Problems
Paper Jam Problems Inside the Product
Start buttons to print the network status sheet.
Stop button if you want to cancel the operation.)
Solving Network Problems
Solving Problems
Solving Copying Problems
Solving Copying Problems
278