Section 10: Specifications - Cub Cadet 1222 Operator's Manual

SECTION 10: SPECIFICATIONS

Capacities
Fuel Tank
Crankcase (approximately)
Hydrostatic Transmission
Make and Model
Gear Ratio
Forward Speed
Reverse Speed
Engine (Air-cooled, 4-cycle)
Make, Model & Type
Cylinders
Bore
Stroke
Displacement
Maximum Power @3600 RPM
Maximum Torque @2400 RPM
Compression Ratio
Engine Speed (governed)
Low Speed
High Speed (no load)
Spark Plug Gap
Armature Air Gap
Electrical System
System Voltage
Battery
Alternator
Fuse (automotive type)
Headlights
Brakes
Turf Tires
Front (inches)
Rear (inches)
Dimensions
Wheelbase
Length, over all
Height, over all
Ground Clearance
Turning Radius
Weight (approximate)
3 gallons (11.4 l)
4 pints / 64 oz. (1.9 l)
Hydro-Gear 311-3000
30.6:1
0 m.p.h. - 5.5 m.p.h.
0 m.p.h. - 2.5 m.p.h.
Briggs & Stratton 40H777-0171
Twin
2.97 in. (75.44 mm)
2.89 in. (73.4 mm)
40.0 cu. in. (656 cc)
22 HP
32.7 lbs. ft. (44.3 Nm)
8.5:1
1200 RPM
3300 RPM (± 100 RPM)
.030 in. (.76 mm)
.008 -.012 in. (.20 -.30 mm)
12-volt Negative Ground
270 CCA (sealed)
16 Amp Regulated
20 Amp
Incandescent
Single Disc (Dry)
16 x 6.5
23 x 9.5
48 in. (121.92 cm)
68.5 in. (173.99 cm)
42 in. (106.68 cm)
6 in. (15.2 cm); Ground Clearance for Deck: 1.75 in. (4.445 cm.)
21 in. (53.34 cm)
529 lb (238.28 kg)
23