Table of Contents
Advertisement
(4)
Next, move the control above the BALANCE parameter name. Slide it
all the way down to get the direct sound only. At the top position you get
just the delay sound.
(5)
Finally. adjust the control above the DECAY parameter name. This sets
the amount of feedback (number of repeats or echoes). At the bottom
position you hear a single repeat. At the top position you get the maximum
number of repeats.
(6)
Now, use the CURSOR keys to select other effects, and adjust them in
the same way.
Undo
To return a patch to its original value, simply select a different patch and
then return to the one that you wanted to reset to ils original value. In other
words, if you switch to another patch without storing the previous one,
any adjustments that you made on the previous one will be cancelled.
Output level adjustment
After adjusting the parameters of individual effects, you can adjust the
Adjusting the output level.
Advertisement
Table of Contents
