Let's try editing the DELI effect in our previously selected patch (preset
1,
patch
1).
(1)
IJse the CURSOR keys to move the flashing offect mark to DELI.
Parameter namt:s DECAY, TIME: and BALANCE will appear on the
display.
( 2 ) Of
tho Ihrot!
names,
DECAY is flashing. I-Iowever, l(?l's adjust the TIME
pararnetcr first. Gradually raise or lower the position o f t h e control over
the TIME indication
\ I
ntil TlME starts flashing. (Or press the CANCEL key
to move to the n e s t adjusta1)le parameter.)
( 3 )
After TIME starts flashing, movemcni
nf
the conLr.01 will affect the
value of the TIME parameter, a s shown by thc parameter bars and the
parameter value readout. Slide it
i l l 1
the w a y dolvn to minirnize the delay
time. Slide it all the waJr u p to
si?t
d d a y lime to the maximum length of one
second.
After storing, the data has been rew~itten so the original data cannot
be recalled. However, you can return all
40
user patches to the factory
preset date. For details, see page
1 5
"To recover factory preset data
in user banks"
.