FOLDING
This command indicates an optional fold type generated by the professional finisher. The short edge feed command is also
required to use the booklet fold command.
PJL
@PJL SET JOBATTR = "@FOLD = value1"
Where value1 is one of the following:
BIFOLDINSIDE = Bi-Folding inside per a page
BIFOLDOUTSIDE = Bi-Folding inside per a page
BIFOLDMULTIOUTSIDE = Bi-Folding multiple pages outside
BIFOLDMULTIINSIDE = Bi-Folding multiple pages inside
Note:
The "Collated" feature needs to be enabled for the booklet functions to work.
BOOKLET
PJL
@PJL SET JOBATTR = "@BKLT = value1"
@PJL SET JOBATTR = "@BKSG = value2"
@PJL SET JOBATTR ="@BKDN = int1"
@PJL SET JOBATTR ="@BKTP = int2"
Where value1 is one of the following:
NONEDIVIDE = Compile a booklet as long as the number of sheet does not exceed the limit
AUTODIVIDE = Divide sheets into sets automatically in case of exceeding the limit number of sheets.
MANUALDIVIDE = Divide sheets based on the specified limit manually
OFF = Do not compile a booklet
Where value2 is one of the following:
RIGHT = Right to left page order binding
LEFT = Left to right page order binding
Where int1 is:
1-9999 = Booklet dividing number for each set
Where int2 is:
1-9999 = Booklet total pages of document
RESOLUTION
PJL
@PJL SET RESOLUTION = value
Where value is:
600
dc10cc0466
Customer Support
Page 11