Xerox WorkCentre 7120 Reference Manual page 2


The first parameter of the command is an attribute followed by a value.

Comment commands must end with a semicolon except for the XRXbegin and XRXend commands.

A comment command not enclosed by XRXbegin and XRXend is NOT a Xerox specific command and is treated as a real
comment with no functional attachment to its contents.

The comment commands are specific to the WorkCentre 7120.
PJL SET Commands
PJL SET commands are available for some features. If you choose to use these commands, do not enclose them with the
XRXBegin and XRXEnd commands.
PJL SET commands do not require a semicolon at the end of the command line.
PCL Commands
PCL commands are available for some features. If you choose to use these commands do not enclose them with the
XRXBegin and XRXEnd commands. Refer to a PCL reference manual for more specific information regarding PCL commands.
PS Commands
PS commands are for some features. If you choose to use these commands, do not enclose them with the XRXBegin and
XRXEnd commands. Refer to a PS reference manual for more specific information regarding PS commands. Ensure that
each command line ends with setpagedevice.
dc10cc0466
Customer Support Page 2