Accessing batch and programming menu screens
Accessing batch and programming menu screens
DC voltage calibration for pumps is running
Please wait...
Calibration is successfully done.
FETCO home screen
Touchscreen
DC voltage calibration for pumps is running
Please wait...
Calibration is successfully done.
From power "OFF" Turn main power switch to "ON"
Touch screen will illuminate, and pump voltage calibration will display
When Complete: FETCO HOME SCREEN will display
Immediately touch and hold finger to enter programming
In 5-8 seconds "PROGRAMMING" screen will appear
First message on touchscreen display at powerup. This shows
only at "POWER ON", when ON/OFF. The software is analyzing
and correcting any variations as a quality control feature.
Batch selection and brew operation menu screens
Tap FETCO HOME SCREEN to enter batch selection screen.
Tap left or right side batches
Hold down batch selector pennant to begin brew.
Programming menu screens
First message on touchscreen display at powerup. This shows
only at "POWER ON", when ON/OFF. The software is analyzing
and correcting any variations as a quality control feature.
FETCO home screen will display on completion
MAIN POWER SWITCH
Located to lower right
side of back panel
FETCO home screen will display on completion
8
Operation screens
FETCO home screen