Replacing The Upper Burr And Bean Hopper - Baratza vario-w Operation Manual

Remove the Bean Hopper and
Upper Burr
Remove all the beans from the
Bean Hopper. Rotate the hopper
counter clockwise until it stops, lift
the hopper off the grinder. Using
the Baratza Burr Tool included
with your grinder, rotate the metal
burr carrier clockwise until it stops,
then lift straight up and out of the
grinder housing (wiggle the burr
carrier if necessary to loosen it).
The ceramic burr is mounted to
the underside of the burr carrier.
Clean the burr using a stiff brush.
Use the bristle brush to remove
any loose coffee residue on the
fixed burr and the lower burr
mounted within the motor housing.
Rotate Baratza burr tool clockwise to
remove the burr carrier.
Replacing the Upper Burr
Wiggle and push down firmly on
the burr carrier to ensure that it
seats properly. Using the Baratza
Burr Tool, rotate the burr carrier
counter clockwise to lock in place.
Note the lock icons and arrows on
top of Baratza Burr Tool indicating
direction to turn.
Rotate burr carrier counter clockwise
to lock in place.
Replacing the Bean Hopper
To replace the bean hopper, line
up the two small tabs on the base
of the hopper with their respec-
tive slots in the top of the grinder
housing and insert the hopper into
the grinder. Once the hopper is
in place rotate it clockwise until it
clicks to a stop (about ¼ inch or
0.4 cm).
9