Clock; Timed Oven Functions; Kitchen Timer; Tones - Kenmore 911.46565 Owner's Manual

OPERATION
Clock and Timer
The clock must be set for the correct
time of day before a delayed oven
function can work properly. The time
of day cannel be changed during a
timed oven function, but can be
changed during a bake or broil
function.
HOW TO SET THE CLOCK
t. Press the CLOCK pad.,
2. Press the UP and/or DOWN
arrow pads to set the time°
3. Press the START pad_
RECALL THE CLOCK
While using your oven for cooking,
press the CLOCK pad if you wish to
check the time of day. The current
time of day will show in the display.
POWER FAILURE
If you have experienced a power
failure, the time will flash in the display
and will be incorrect, Reset your
clock_
Any oven cooking function that was in
process will need to be reset.
The Kitchen Timer is used to time
cooking processes or other house-
hold activities. It does not control the
oven. It can be set for up to 9 hours
and 59 minutes. It will count down in
minutes until the LAST 60 SEC-
ONDS is reached, then the control
will beep once_ When the countdown
reaches ZERO, the control will beep
3 times followed by one beep every 6
seconds until the KITCHEN TIMER
ON/OFF pad is pressed The 6
second beep can be removed for
future cycles if desired For directions
on removing this continous beep, see
Tones on the following page°
HOW TO SET THE TIMER
KITCHEN
1. Press the KITCHEN TIMER
ON/OFF pad.
2. Press UP and/or DOWN arrow
pads to set time,
3. Press the START pad.
4. When the countdown has reached
zero, press the KITCHEN
TIMER ON/OFF pad to turn off
the beep
To cancel the timer during the
countdown, press the KITCHEN
TIMER ON/OFF pad TWICE,
I1