Creating Waypoints Using The Map - Garmin GPSMAP 3005C Owner's Manual

Review Waypoint Page

Creating Waypoints Using the Map

You can create a waypoint by using the map pointer to point to any map
location or map feature. When you move the pointer over a map item, you see a
highlighted description of the item.
To create a new waypoint using a map location:
1. Use the ROCKER to move the pointer to the map location you want.
2. Press and quickly release ENTER/MARK to capture the pointer location.
Do not hold the button down; doing so marks your current location, not the
map location. The Review Waypoint Page appears.
3. To accept the waypoint with the default information, press ENTER.
OR
To change any waypoint information, highlight the appropriate field and
press ENTER. After entering your changes, press the OK soft key. For
information on editing waypoints, see page 15.
GPSMAP 3005C Owner's Manual
B
ASIC
To create a new waypoint from a map feature:
1. Use the ROCKER to move the map pointer and highlight the map feature
you want.
2. Press ENTER/MARK to capture the pointer location. The Review Page for
the selected map feature appears.
3. Press the Create Wpt soft key to open the Review Waypoint Page.
4. To accept the waypoint with the default information, press ENTER.
OR
To change any waypoint information, highlight the appropriate field and
press ENTER. After entering your changes, press the OK soft key.
Waypoint Created from a Map Feature
O > C U W
PERATION REATING AND SING AYPOINTS
13