Garmin GPSMAP 3005C Owner's Manual page 51

To select the Tide Station nearest to your location:
1. Highlight the For field, and press ENTER to open the Find Tides Page.
2. Highlight Current Position, and press ENTER to open the Find Near
Current Position Page.
3. Select a Tide Station from the list, and press ENTER. As you move the
highlight over each Tide Station in the list, the station is highlighted on
the map window. The distance and bearing from your location to the
highlighted Tide Station are shown at the bottom of the list.
Tide Stations Near Your Location
If you are not within range of a Tide Station, the message "None Found" appears.
Use the Map Position option to select a location closer to a Tide Station.
To select a Tide Station from a map location:
1. Highlight the For field, and press ENTER to open the Find Tides Page.
2. Highlight Map Position, and press ENTER to open the Find Near Current
Position Page.
GPSMAP 3005C Owner's Manual
3. Press up or down on the ROCKER to move the map pointer to a map
location, and press ENTER. The Find Near Other Position Page shows a
list of Tide Stations near the selected map location.
4. Select a Tide Station, and press ENTER. If the "None Found" message
appears, repeat steps 1–3 until you find a Tide Station.
Viewing Tide Information
You can change the date to see tide charts for other days, or move the time bar in
approximately five minute increments to show tide heights at various times.
To change the date of the tide chart:
1. Using the ROCKER, highlight the On field, and press ENTER.
2. Enter a date, and press ENTER. The tide chart is updated to show tide
information for the selected date.
3. Press the Current Date soft key to return.
To view tide heights at various times on the tide chart:
1. Highlight the tide chart.
2. Press left or right on the ROCKER to change the time and day. The day
changes as you move past the edge of the tide chart.
M M > T T
AIN ENU IDE AB
43