Advertisement
EPG (Electronic Program Guide)
Press EPG button on the remote control, the electronic
program guide
will appear in the center of screen. The electronic
program
guide gives
the TV program
playing project. You can use left/right arrows to switch
pages.
Adjust the OSD Screen
The OSD (On Screen Display) menu enables you to approach to the TV
functions.
To use OSD menu system, press MENU button on remote control,
then use bff/right
arrow to highlight an option from PICTURE, SOUND,
CHANNEL,
PARENTAL, SETUP or OTHERS and press ENTER/down
button.
Press the up and down arrow to move to a different option within each
menu. If necessary,
press ENTER or right arrow to display the choices
of the option you've highlighted.
If available, use the text at the bottom
of each screen for help. To return to the previous menu, press the
MENU button.
To exit the OSD menu:
•
Press the EXIT button. The menu will clear from the screen.
•
Press the MENU button repeatedly until the menus disappear.
Picture Menu
The Picture Menu contains
menus and controls
to configure
the way
the picture appears. The Picture Menu options apply to the video for
the main TV and VIDEO INPUT selections.
All picture options can be
applied to each input.
Press MENU on the remote. Select Picture from the Main menu. Press
the ENTER/down
button to proceed to PICTURE menu.
Use up/down
to choose the function you need, press ENTER or right
arrow to adjust or enter a sub-menu.
The sub-menu
image and
explanation
are shown below.
If available, use the text at the bottom
of each screen for help.
Picture Settings
Picture Mode: Choose the preset visual mode of your TV:
Standard,
Movie, User, Dynamic, Power Saving. (Only in User
mode you can adjust Brightness,
Contrast, Color, Tint and
Sharpness.
Changes to Power Saving mode can decrease
the
power consumption.
)
•
Brightness: Adjust the brightness
of picture.
•
Contrast: Adjust the contrast of color.
•
Color: Adjust the richness of color.
•
Tint: Adjust the balance between red and green level (only
available in NTSO signal).
•
Sharpness: Adjust the sharpness
level of picture.
Screen Size
Screen Size: Select a screen aspect ratio. (Available ratio: Wide,
Cinema, Zoom, and Normal.) Please choose the ratio that applies
to your video signal format best.
8
PC Settings
(only
available
in PC mode)
•
Auto Adjust: Adjust the PC picture display automatically.
•
Horizontal
Position: Adjust the horizontal
position of picture.
•
Vertical Position: Adjust the vertical position of picture.
•
Clock: Adjust the clock of picture.
•
Phase: Adjust the phase of picture.
•
Reset: Reset all the PC picture settings to factory default.
Color
Temperature
This option allows you to select one of three automatic
color
adjustments:
0ool for a bluer palette of picture colors; Normal or
Warm for a redder palette of color.
Advanced
Picture
Settings
(not
available
in PC mode)
•
Dynamic Contrast:
Set dynamic
contrast Off/Iow/MediurrVHigh.
•
Film Mode: Set film mode on/off.
•
Noise Reduction: Set noise reduction
as Off/Iow/MediurrVHigh.
•
MPEG Noise Reduction:
Set MPEG noise reduction
as Off/low/
Mediumor High.
Note: Noise reduction
helps to reduce the picture "static" or
any type of interference. This feature is especially useful for
providing a clearer picture in weak analog signal conditions.
The MPEG Noise Reduction
specifically works on video signal
with MPEG coding.
Sound Menu
The Sound Menu lets you adjust audio output. To access the Sound
Menu, press MENU on the remote, and then select SOUND from the
Main Menu. Press ENTER/down
button to proceed to SOUND menu.
Use up/down
to choose the function you need, press ENTER or right
arrow to adjust or enter a sub-menu.
Thesub-menu
image and
explanation
are shown below.
Sound Settings
•
Sound Mode: Choose the preset sound mode of your TV:
Standard,
Soft, User, Dynamic. Only in User mode you can
adjust Bass, Treble, Balance.
•
Bass: Adjust the bass component
of TV sound.
•
Treble: Adjust the treble component
of TV sound.
•
Balance: Adjust the balance between the left and right channel.
Surround Mode
Creates a 3D sound surround
from standard
stereo material, with
deep and rich enhancement.
Auto Volume
Set auto volume control on/off.
Analog Sound
Select analog TV audio sound type: Stereo, Mono or SAP (only
available in TV mode).
Digital Sound
Select digital TV audio language type: English, French or Spanish
(only available for DTV channel).
Equalizer Settings
The seven-band
graphic equalizer allows you to adjust the audio
frequency
settings. You can select one of the equalizer presets
(Off, Pop, Rock, Jazz) or create your own personal preset (User).
Press the left or right arrow to select the frequency
(100Hz, 250Hz,
500Hz, 1KHz, 2KHz, 4KHz, 10KHz) you want to adjust. Use the
up or down arrow to adjust.
Channel Menu
The Channel Menu enables you to search, view and edit channels.
It is
available in TV mode only. Press MENU and choose CHANNEL from
the Main menu. Press the ENTER/down
button to proceed to
CHANNEL
menu.
Use up/down
to choose the function you need, press ENTER or right
arrow to adjust or enter a sub-menu.
Thesub-menu
image and
explanation
are shown below.
Channel List
Displays a channel list. It shows the current channels.
Favorite List
Displays
a favorite
channel
list.
It shows
the
current
favorite
channels.
Channel Settings
Go to channel setting sub-menu.
Channel:
Press up/down
arrow to switch the channel you want to
edit.
Skip: Set if the current channel is skipped.
Favorite:
Set if the current channel is the favorite channel.
Label: Enter a channel label to rename the current channel.
Signal Type
Select your TV signal type: Air or Cable.
Auto Channel Search
Execute an auto channel search (see page 7).
Parental Menu
The Setup Menu enables you to lock program
with special content,
panel key board and input source. Press MENU and choose
PARENTAL from the Main menu. Press the ENTER/down
button to
proceed to PARENTAL menu.
Lock Parental Control
• When the Parental Control Menu is accessed from the Main
Menu, you need to enter password
to unlock the menu function.
Please enter your four-digit
password
with numeric keys 0.-9.
Note: rhe onglr_a/ passworfJ It_"()CO0".
• After unlocking,
the items in parental control menu can be used.
Use arrow up/down to highlight the function you need and press
ENTER or right arrow to use V-chip, Change Password,
Keypad
Lock and Source Lock, Clear Channel List sub-menu.
V-Chip
Press ENTER or right arrow to enter V-chip sub-menu,
the detail as
follow:
US V-Chip
Press ENTER or right arrow to enter US V-Chip ratings menu,
which contains two sub-menus:
Movie Rating and TV rating. See
next page for more details.
Movie
Rating
use arrow keys to select the rating level you want to block, press
ENTER to IoeWunloek the rating level. If you have blocked a lower
level rating, the higher ratings will be blocked too.
For example, when PG-13 is blocked,
R, NC-17 and X will be
blocked at the same time.
TV Rating
similar with Movie Rating. After adjusting, press MENU to return or
press EXIT to exit the menu.
TV Rating Overview
TV-MA
Mature Audience Only
D
Sexually Explicit Dialogue
TV-14
Parents Strongly Cautioned
L
Adult Language
TV-PG
Parents Guidance Suggested
S
Sexual Situations
TV-G
General Audience
V
Violence
Directed to Children 7
TV-Y7
Years and Older
FV
Fantasy Violence
TV-Y
All Children
For more rating
explanation,
see page
12.
Canada V-Chip
Press ENTER or right arrow to enter US V-Chip ratings menu,
which contains two sub-menus:
English Rating and French Rating.
English
Rating
Press ENTER or right arrow to enter English rating menu.
Use arrow keys to select the rating level you want to block, press
ENTER to IocWunlock the rating level. If you have blocked a lower
level rating, the higher ratings will be blocked too.
For example, when PG is blocked,
14+ and 18+ will be blocked at
the same time.
French
Rating
Press ENTER or right arrow to enter French rating menu.
Similar with English Rating.
9
Note: These ral_rrgs are awliE_bl_ only if Ibe broadenster
is sen@rtq
rzlh_g ff_forrnahan.
Block
Unrated
Show
Block
all the unrated
program.
Downloadable
Rating,
Clear
Downloadable
Data
Activate
or downioadable
rating data.
if available.
Change
Password
Change
the password
of parental
menu.
Old PiN: Input the old password.
New PiN: input the new password.
Confirm:
Input the new password
again to confirm.
Remote
Select your Remote: Off, Remote1
or Remote2. This is for special
purpose.
Keypad Lock
Select this option to block or unblock the TV's panel buttons so
that they can't be used.
Source Lock
This option allows you to lock or unlock the input source. The
source blocked
can not be chosen from input list unless you input
the correct parental password.
Use up/down
arrow to select the source, press ENTER to lock or
unlock it.
Clear Channel List
This option allows you to execute Clear Channel List function. This
function will reset the whole TV system to factory default (not only
reset OSD menu).
Setup Menu
The Setup Menu lets you config the TV with your preferences.
Select
SETUP from the Main Menu. Press ENTER/down
button to proceed to
SETUP menu.
Use up/down to choose the function you need, press ENTER or
right arrow to adjust or enter a sub-menu.
The sub-menu
image
and explanation
are shown below.
Closed Caption
Press ENTER or right arrow to enter Closed Caption sub-menu,
the detail as follow:
Caption Display
Press left/right arrow to select caption display on or off.
Analog Caption Type
Press left/right arrow to select analog closed caption type: OO1,
002,
003,
004,
TEXT1, TEXT2, TEXT3, TEXT4.
Digital Caption Type
Press left/right arrow to select digital closed caption type: Service1,
Service2, Service3, Service4, Service5, Service6.
Digital CO Preset
Press left/right arrow to select digital closed caption preset: Default,
Custom.
Only in custom mode you can adjust the digital closed
caption style.
Digital CC Style
Press left/right arrow to go to digital closed caption style sub-menu,
to select the closed caption style.
Select the item you want to adjust in Digital 00 Style menu with
up/down
arrows.
After changing,
you can preview the caption style in the bottom.
Menu Language
To choose your menu language, press the bff/right
arrow until the
language you need appears.
Available languages:
English, French and Spanish.
Menu Transparency
To choose your menu transparency
mode, press the left/right
arrow until the transparency
you need appears: Off, Low, Medium,
High.
Video Style
If you connect the HDMI/DVI port of PC to HDMI jack of the TV
and the video signal is 1080p, please choose the compatible
video
style: Video, Graphic.
Clock
Press ENTER or right arrow to enter Clock sub-menu,
the detail as
follow:
Time Zone
Select your time zone: Eastern, Central, Mountain,
Pacific, Alaska,
Hawaii, Samoa,
Newfoundland,
Atlantic.
Auto Clock
Select auto clock on/off. Auto clock helps you synchronize
your TV
time to standard
time (from DTV signal).
Setup Time
Set your TV time manually (needs to turn off auto clock).
Day of Week
Displays what day it is (can't be adjusted, displays only).
Daylight Saving Time
Set your daylight saving time on or off (needs to turn on auto clock).
Initial Setup Wizard
To set the initial settings. (see page 7)
Others Menu
The Others Menu lets you config the TV with your preferences
in other
features. Choose OTHERS from the Main Menu. Press ENTER/down
button to proceed to SETUP menu.
Use up/down to choose the function you need, press ENTER or right
arrow to adjust or enter a sub-menu.
The sub-menu
image and
explanation
are shown below.
Blue Back
Press ENTER button to select Blue Back on or off. If the Blue Back
is turned on, the TV will display a blue background
when there is
no signal input.
No Signal Power Off
Press ENTER button to select "No Signal Power Off" on or off. If it
is turned on, the TV will shut off after 1C-minute no signal time. We
suggest you turn on this function when Blue Back is turned on. It
may hurt the LED LCD panel if blue screen is on for too long.
Note: In PC mode, the monitor standby and power off settings
depend on the No Signal Off time.
No Operation
Power Off
Press ENTER button to select "No Operation Power Off" on or off.
If it is turned on, the TV will shut off after a 3-hour no operation
time.
All Reset
Press ENTER button to execute
reset to TV system. All the settings
will be reset to factory default.
Audio Only
Press ENTER button to activate audio only mode. The TV will
output only sound and the panel will be turned off. To restore
normal playing, hold POWER button for three seconds.
Note: The OSD's appearance
and color are referred to the actual
appliance.
DVD mode of TV LED24C45RQD
TV LED24045RQD
has a built-in DVD player module, which you can
use to watch DVD disk. The following operation guide gives the DVD
module instruction.
1, How to enter DVD mode for TV LED24045RQD
Press INPUT button on remote control, select "DVD" in the Source
Select menu (see page 7), then press ENTER or right arrow to enter
DVD mode. The DVD will start playing automatically
if there is a disk in
DVD module. If not, the TV will display a standy screen as shown. And
a "No Disc" message will appear on screen.
Note: The TV will turn to DVD mode automatically
when you if}sert a
disk, no matter which mode it is now.
2. Insert a disk to DVD player
Insert the DVD disk with reflector surface facing the front of TV.
Disk reflector surface facing the front of TV.
Note: Do not insert with much strength.
Insert disk gently and the DVD
module will load in the disk
automatically.
3. DVD control
You can control the DVD playing with keypad on DVD module or with
remote control. For operating information,
see the follow.
Keypad
on DVD module
EJECT (&): Ejectsor loads the disk from DVDmodule.
PLAY/PAUSE ( In): Plays or pauses the DVDdisk.
About DI/D control buttons on remotecontrol, seepage 6, remote control buttons
4. DVD basic operations
Play/pause
the disk: After inserting the disk to DVD module, the TV
will play DVD disk automatically.
You can use PAUSE button to
suspend the playing. Press PLAY button, the TV will restore playing.
Stop playing:
During playing, you can use STOP button to stop
playing. If you press STOP once, the DVD will be stopped briefly. Press
STOP again, it will stop completely
and the disk in DVD module no
longer wheels.
Eject the disk: You can press EJECT button to eject the disk from
DVD module. And press EJECT again, the DVD will load the disk
renewedly.
Going backward
or forward:
You can press FR for fast review and FF
for fast forward. You can also press PREV to return to the previous
chapter, and press NEXT to skip to next chapter.
Function
menu: Press DVD-M, you will return to the selection menu of
current DVD function. For example, you are using "Audio Selection",
and you choose "Continue playing", then after selecting, you can press
DVD-M to go back to "Audio Selection"
menu while playing.
Title menu: Press TITLE, you can reset the disk to the title menu. It
equals to ejecting and loading the disk again.
Zoom in: Press ZOOM, you can zoom in the screen for 2 times, 3
times or 4 times from centre. This function provide a better view of the
content locate near screen centre.
Subtitle
selection:
Press SUB-T, you can switch the available subtitles
in DVD disk.
Audio language
selection:
Press AUDIO, you can switch the available
audio language in DVD disk.
Repeat:
There are two kinds of repeat, one is regular repeat and the
other is Atop repeat. For regular repeat, press REPEAT button to
switch between chapter repeat, title repeat and all repeat. For A-to-B
repeat, press A-B once to set the repeating origin and press it twice to
set the repeating end.
DVD-setup
menu: Press SETUP button, a specific setup menu for
DVD will display on screen. This menu is especially prepared for DVD
control. For menu instructions,
see the follow.
5. DVD setup menu
A. General setup page
There exist three sub-menus
in DVD setup menu, the first one is
General Setup. Press SETUP button on remote control to display
General Setup Page. Press up/down
arrow to select the item you
want to adjust and press right arrow or ENTER button to activate it.
After activating,
use up/down
arrow to set item value. When you are
satisfied with the adjustment,
press left arrow to return to the upper
1-0
level of general setup menu. Press left arrow repeatedly,
you can exit
the DVD setup menu. To exit setup menu directly, press SETUP.
TV Display
Set the TV display shape.
OSD
Lang
Set the DVD OSD language as English, French or Spanish.
Last
Memory
Set it on to memorize the last stop point. During playing the DVD,
if you change to another mode and then come back to DVD mode,
it can play automatically
from the last stop point.
Note: We suggest you turn off the last memory function unless you
really need it. To turn on this function
may if}fluence the lifetime of
flash memory of DVD module.
B. Speaker
setup
page
Press SETUP button on remote control to display General Setup Page.
Press left/right arrow to choose Speaker Setup Page. The operating
method
is similar with the General Setup Page.
Downmix
This option is preset as Stereo. That means the DVD player will
output a two-channel
audio signal (L/R) to TV front speakers
(left/right).
C. Preference
page
Press SETUP button on remote control to display General Setup Page.
Press left/right arrow to choose Preference Page. The operating
method
is similar with the General Setup Page.
TV Type
Set the TV type as PAL, Auto or NTSO.
Note." American
DVD standard
is NTSC system, so we suggest you
set the TV Type as NTSC. In addition
you can also set it as PALto
watch some disks w th PAL system, or se ect Auto for conven ence.
Audio
Set the DVD audio language.
Subtitle
Set the DVD subtitle language.
Disc
Menu
Set the DVD disk menu language.
Parental
Set the parental control rating as KID SAF, G, PG, PG13, PGR, R,
N017 or ADULT. To change this option, you need password,
and
the original one is "0000".
Default
Reset the DVD setup menu options as factory default.
What's the most convenient
way to view High
Definition (HD) video?
Connect an antenna to the TV Input jack to view free local digital
channels. You may need to purchase
an antenna. (See page 4 for
more information
about antenna setup).
Visit _#_vw.antennaweb.org
for assistance
in deciding what type of
antenna to use to receive the local digital channels available to you.
After entering your location, this mapping program
tells you which local
analog and digital stations are available using a certain antenna.
Are there other ways to view High Definition
(HD) video?
Besides using an antenna as rrlentioned
above, you cars also use a
set-top box to receive digital video. Contact your cable service provider
or satellite provider to purchase
digital programming
and have them
connect the box to ensure you are viewing channels in the best way.
How do I tell an analog channel
from a digital
channel?
Press the DISPLAY button to display the Channel Bar. Look at the top
right corner of the screen. An "A" is displayed for an analog channel.
A "D" is displayed for a digital channel.
Note: Since the analog TV in America
has been cut off, we reserve
analog TV function only for some unexpected
use.
Why are there bars on my screen, and can I get
rid of them?
Most digital video is sent in a 16/9 format which fills your screen, but is
sometimes
sent in 4/3 which does not fill your screen. It depends on
how the station or device connected
to your TV is formatting the video.
If there are bars on the screen,
press the ASPECT button to try a different format that may eliminate
the bars. Some bars can't be removed
because of the way the format
is sent by the broadcaster.
The format changes as you press the
ASPECT button and the format type is displayed at the bottom of the
screen. For more information
on screen size, go to page 8.
Why does channel
search find a lot of channels,
but when I try to tune to them, there's
nothing
there?
Some channels don't carry programming,
such as video On Demand.
When channels are unavailable,
your TV screen is blank or appears like
snow. You probably want to remove these channels from your channel
list. Remove these in the Channel List Menu. Go to page 9 for more
information.
Why does it take a long time when I search the
channels
at first time?
If you have both analog and digital channels, the TV is looking for all
available channels in the channel list. If you do have digital channels,
the TV is also searching
for scrambled
channels,
non-scrambled
channels, and each sub-channel
of that digital channel.
Identifying
Problems
If there are any problems
when using the product,
please consult the
list below. If the list does not solve the problem, call our Customer
Service Center immediately.
TV Problems
The
TV can't
be turned
on.
•
Make sure the AO cord is plugged in.
•
Check the wall outlet, make sure the AO output works normally and
stably.
•
The side panel may be locked (disabled). Use the remote control to
turn on the TV.
•
Select the Keypad Lock function
in the PARENTAL Menu and press
ENTER to uncheck
the locking status.
There
is no picture
or sound
but the TV is on and
there
is a "No
Signal"
sign
on screen.
•
Are you trying to use an input source with no device connected
to
it? For using other video/audio
device, make sure the external
device works normally first, then press INPUT and choose the right
input source.
•
The Signal Type option may be set incorrectly.
Go to page 9 for
detailed instructions.
•
The channel may be blank. Try to search the channel again or
change another channel.
The
sound
is fine,
but the picture
is poor.
•
If you can only get black and white pictures from external device
that you've connected
to your TV, maybe it is due to the video
cables is not connected
well, or they are connected
wrongly.
Check the connection
stability first, then check the correctness.
For
AV input, the yellow video cable connects to the yellow Video In
jack on the side of your TV. For Component
input, the three Y, Pb,
Pr video cables (red, blue, and green) should
be connect to the
corresponding
input jacks on the side of your TV.
•
Check the antenna connections.
Makesureallofthecablesare
firmly connected
to the TV jack on side of your TV.
•
Try adjusting the color features to improve.
There
is no sound,
but the
picture
is fine.
•
The sound might be muted. Try pressing the MUTE button to
restore sound.
•
For using AV or Component,
remember to connect the device's left
1-1
Advertisement
