Specifications; Requirements; Weights Capacities And Measurements; Electrical Configuration And Brewing Efficiency - Fetco Extractor TBS-2121 User Manual

Specifications

Requirements

Water Requirements:
TBS-2121: 35-50 psig (241-345kPa) 1½gpm/(5.7lpm)
Factory calibrated for 45 psi water supply to inlet
Water inlet fitting is a 1/4 inch male flare.
Brew Volume: 3-5 gallon [3 gallon factory set]
Ratio: TBS-2121 (user adjustable) factory setting automatically adds 2 gallons of cold water for a 1:2 ratio Iced Tea (one third hot / two thirds cold).
Water Supply Pressure: Unit is factory calibrated to a stable, non-fluctuating water supply at 45 psi.
Unit may require calibration for other water pressures. See "Dill. Volume" setting in "PROGRAMMING" menu
Designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to change by FETCO without notice.

Weights Capacities and Measurements

Weights and Capacities & Measurements-TBS-2121—Without Sweetener Option
Height Width
33 7/8 in 13.5 in 19 1/2 in
859mm 343mm 495mm
*
Measurement made with a single ITD-2135 Iced Tea Dispenser

Electrical Configuration and Brewing Efficiency

Electrical Configurations TBS-2121-3 gallon brewer without Sweetener Option
Configuration Code Heater Configuration Voltage
1 X 1680
T212101
NEMA PLUG CONFIGURATION
G G
W
W
NEMA 5-15P NEMA 5-20P
Designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to review and change by FETCO without notice
Empty Filled
Depth
Weight Weight
35 lbs 43.7 lbs
15.9 kg 24.6 kg
Phase
120 1
Coffee Filter Size:
15" X 5 ½ " – standard FETCO # F001
Electrical: See electrical configuration chart.
Temperature:
level)
Total Weight-
Brewer &
*
Filled Dispenser
77.8lb
40.3 kg
Electrical Connection
Wires
US/Canada
2+G NEMA 5-15P/5-20P-c
3
200°F (93°C) inside water tank (at sea
195°F (91°C) ± 5° at sprayhead
Shipping
Shipping Dimensions
Weight
46 lbs 23 1/4" x 14 1/2" x 371/8"
20.9 kg 591 x 268 X 943mm
KW Maximum Amp Draw
1.7 14
Batches per Hour
(3gal/11.4L per batch)
4