When Placing The Speakers On A Table - Panasonic SC-HTB770 Owner's Manual

When placing the speakers on a table
i!
Place the speakers using the leg stands
[_ 2 Front [_ 1 Center speaker [_
speakers
3 Speaker cables
WHITE: Left
RED: Right
GREEN: Center
[_ 1 Metal [_ 2 Leg stands _ [_ 6 Screws
bracket _ __
• For a safety measure to prevent the speakers from falling, refer to page 24.
• To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
_ Assemble the 1 and 2 of "Place the
speakers following steps speakers
horizontally" (_ 12, 13).
_ Attach the leg stands.
With the speaker facing down, the speaker attached to the red connector cable is
Red connector:
to be placed on the left side.
With the speaker facing down, the speaker attached to the white connector cable is
White connector:
to be placed on the right side.
• Keep the screws out of reach of children to prevent swallowing.
_Red
_) White
O Screw (supplied)
• Tighten securely•
O Screw hole
Align the higher or lower holes with the projecting parts on the
speaker.
• By changing the position that the stand is attached to the
projecting parts, the height can be adjusted by 9 mm (W32").
(_ Right speaker connector
(D Left speaker connector
RQT9778
19