Panasonic SC-HTB770 Owner's Manual page 13

_ Connect the speaker cables.
Push
J
White
O Insert the wire fully.
4-: White
--: Blue line
• Insertthewire futty,takingcarenot to insert
beyondthewire insulation.
Press into the groove.
Green
, Red
O Right speaker connector
O Center speaker connector
0 Left speaker connector
÷ If you have difficulty inserting the cable, try straightening the speaker cable and then bending the
cable about 20 mm (2:/32")from the tip, at an angle of approx. 450 (as illustrated above).
_ Drive into the wall.
a
screw
• Usethe measurements indicatedbelow to identifythe screwingpositionson thewatt.
• Leaveat least 20 mm(2%2") o f spaceabove andon each side of the speakerto allowenoughspacefor fitting thespeaker.
• Keepthe screwsout of reachof chitdrento preventswallowing.
O At least 30 mm (1 She")
O f_)4.0 mm (5/32")
O f_)7.0 mm to f_)9.4 mm (9/32"to S/s")
(D Wall or pillar
O 5.5 mm to 6.5 mm (7/32" to 1/4")
Front view (semi-transparent image)
i
O 238 mm (9 3/s") O 745 mm (29 1t/321')
O
248 mm (9
3/41')
• Wall mounting hole
20 mm (2:/32")
RQT9778
13