Fb100 Remote Control & Room Sensor - Bosch Greenstar 57 Manual

6 | Bosch Greenstar
1.3 FB100 Remote Control & Room Sensor
The FB100 can only be connected
to systems with FW200 and a boiler
with BUS-enabled Heatronic 3.
The FB100 is a remote room sensor and user interface

that is used to display device and system information
and to change the settings of that particular zone.
The FB100 is designed for wall mounting.

 In connection with the IPM2 module, the FB100
controls the assigned heating circuit using a timer
program. Three weekly heating programs with six
switch points per day are available for a heating circuit
(one program is active).
Maximum of four FB100 in a heating system with

FW200.
In case of power failure, the display will be off. All

settings are saved.
Data subject to change
Scope of delivery
1
4
Fig. 2 FB100 Remote Control & Room Sensor
1 Upper part of remote control
2 Base for wall-mounting
3 Top cover
4 Installation and operating instructions
Applications Manual
3
2
8
Bosch Thermotechnology Corp.