Buick 2014 Regal Infotainment System Manual page 75

4. Once all calls are merged, the
Merge button becomes an
Unmerge button. Press to
unmerge the calls.
Some wireless service carriers
may not allow a merged call to
become unmerged.
Press on the steering wheel
controls.
Press End on the center stack
display to end all existing calls,
or press End next to a call to
end only that call.
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
1. Press the PHONE screen
button.
2. While in the Call View, press
to raise the Interaction Selector.
3. Select KEYPAD and enter the
number.
The default voice mail number is the
phone number of the currently
connected phone. The voice mail
number can be changed in
Bluetooth settings.
To dial a voice mail number:
1. Press the PHONE screen
button.
2. Select VOICE MAIL.
3. Select Call.
4. Enter the DTMF tones using the
keypad if needed.
To use voice recognition, press the
button on the steering wheel. Use
the commands below for the various
voice features. For additional
information, say Help while in a
voice recognition menu. See
using voice recognition commands.
Calls can be made using the
following commands.
To call a number:
1. Press . The system responds
Command Please, followed by
a tone.
2. Say Dial or Call followed by
the complete phone number.
Use the Voice Keypad command
for international numbers or special
numbers which include * or #.
Once connected, the person called
will be heard through the audio
speakers.
for help