Buick 2014 Regal Infotainment System Manual page 72

3. A four-digit Personal
Identification Number (PIN)
appears on the display. The PIN,
if required, may be used in
Step 5.
4. Start the pairing process on the
cell phone to be paired to the
vehicle. See the cell phone
manufacturer's user guide for
information on this process.
5. Locate Buick Intellilink on the
display. Follow the instructions
provided in Step 3 to enter the
PIN. After the PIN is
successfully entered or the code
is confirmed, the system
responds with <Device name>
has been successfully paired
when the pairing process is
complete.
6. If Buick Intellilink does not
appear, turn the phone off or
remove the phone battery and
retry.
7. If the phone prompts to accept
connection or allow phone book
download, select Always Accept
and Allow. The phone book may
not be available if not accepted.
8. Repeat Steps 1 7 to pair
additional phones.
1. Press the PHONE screen
button.
2. Select PHONES.
1. Press the PHONE screen
button.
2. Select PHONES.
3. Press the next to the phone to
disconnect.
Only disconnected phones can be
deleted.
1. Press the PHONE screen
button.
2. Select PHONES.
3. Press the next to the phone
to delete and follow the on
screen prompts.
To link to a different phone, the new
phone must be in the vehicle and
paired to the Bluetooth system.
1. Press the PHONE screen
button.
2. Select PHONES.
3. Select the new phone to link to
from the not connected
device list.