Using Child Lock; Other Functions - LG LCE30845 Owner's Manual

OPERAIINO iNSIRUcliONS
USING CHILD LOCK
You can lock the entire cooktop at any time when
it is not in use. Locking the cooktop will prevent
Cooking Zones from being turned on
accidentally.
SETTING CHILD LOCK
The cooktop must be OFF to set the
CHILD LOCK function. If it is not OFF,
touch and hold the POWER pad for
approximately 2 seconds. The indicator
above the POWER pad will turn OFR
Touch and hold the CHILD LOCK pad for
3 seconds. The indicator light above the
CHILD LOCK pad will turn on to indicate
that the cooktop is locked.
CANCELING CHILD LOCK
To turn off CHILD LOCK, touch and
hold the CHILD LOCK pad for 3
seconds. The indicator light above the
pad will go off and the cooktop can now
be used normally.
OTHER FUNCTIONS
POWER SHARING
Your cooktop is equipped with four induction
Cooking Zones within two heating sections. The
right and left Cooking Zones are powered by two
independent induction inverters--one inverter for
each of the two heating sections. Two Cooking
Zones in a heating section share the power of
one inverter. This is called power sharing.
For example, if you are cooking on both right
Cooking Zones, the last power level set will be
maintained, while the first Cooking Zone may
experience a slight reduction in the power level.
POWER SHARING TIPS:
Remember to set the power level for the food
item you wish to keep constant last. When using
two Cooking Zones, you can maintain a constant
power level for two pans on separate heating
sections. Place one pan on one of the Cooking
Zones of the left heating section and the other
pan on one of the Cooking Zones of the right
heating section.
//_ -\
/ ,, // \'\\
, _ i_i "\
; t
f
gooeY;°:_ ""-. /"
Left heating Right heating
,.4 section section jl
AUTOMATIC SHUTOFF
If a Cooking Zone is in constant use for more
than 17 hours and the control setting is not
changed, the Cooking Zone will shut off
automatically.
AUTOMATIC POWER LEVEL CONTROL
The power level displayed may be different from
the actual power level at the high temperature
range. To prevent the cooktop from overheating,
the power level is controlled automatically.