Procedure For Tilting Down (Manual Tilt Models); Procedure For Tilting Down - Yamaha F6 Owner's Manual

5. Models equipped with trim rods: Once the
outboard motor is supported with the tilt
support lever, press the power trim and
tilt switch / power tilt switch "
retract the trim rods.
ECM00250
CAUTION:
Be sure to retract the trim rods completely
during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU30192
Procedure for tilting down (manual tilt
models)
1. Place the tilt lock lever in the lock posi-
tion.
2. Slightly tilt the engine up until the tilt sup-
port bar is automatically released.
3. Slowly tilt the engine down.
EMU28054

Procedure for tilting down

Power trim and tilt models / power tilt models
1. Push the power trim and tilt switch / pow-
er tilt switch "
motor is supported by the tilt rod and the
tilt support lever / tilt support knob be-
comes free.
2. Release the tilt support lever or pull out
the tilt support knob.
" (down) to
" (up) until the outboard
3. Push the power trim and tilt switch / pow-
er tilt switch "
board motor to the desired position.
UP
DN
DN
Operation
" (down) to lower the out-
ZMU01936
43