Print A Network Status Sheet; Printing And Copying Problems - Epson ARTISAN 725 Quick Manual

Cannot scan over the network
■
Epson Scan is not available in Mac OS X 10.6; see page 30 for scanning
instructions.
■
If you cannot scan from the product's control panel, make sure you restarted
your computer after installing the product software. Make sure Epson Event
Manager is not being blocked by your firewall or security software.
■
If you are scanning a large photo or document at high resolution, a
communication error may occur. If the scan did not complete, lower the
resolution.
■
If network communication was interrupted while starting Epson Scan, exit
Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart,
turn the product off and on, and then try again. Check the
in
EPSON Scan Settings

Print a Network Status Sheet

1. Press
2. Press u or d to select
3. Press u or d to select
4. Press x

Printing and Copying Problems

■
Make sure your paper is loaded printable side down (usually the whiter,
brighter, or glossy side). Don't load paper above the edge guides.
■
Make sure the type of paper you loaded matches the paper size and paper type
settings on the control panel when copying or printing (see page 15), or in
your printer software (see page 26).
■
You cannot print or copy when an ink cartridge is expended even if the other
cartridges are not expended (but you can still scan and view photos on the
display screen). Replace any expended cartridges before printing or copying.
■
For 2-sided printing with Macintosh, you may see a message that the auto
duplexer is not installed. Open
Epson Software folder), click the
and click
50
Solving Problems
, until
Home Setup
Network Settings
Confirm Network Settings
to print a network status sheet.
Start
. Then close and reopen the print window.
OK
. For details, see the Epson Scan Help.
is selected, then press
, then press
EPSON Printer Utility 4
Printer and Option Information
Timeout Setting
.
OK
.
OK
, then press .
OK
(in the Applications/
button,