Vibration Reduction - Nikon COOLPIX P7800 Reference Manual

Vibration Reduction

Press the d button M z tab (A13) M Vibration reduction
Set to reduce the effects of camera shake while shooting.
Set Vibration reduction to Off when using a tripod to stabilize the camera
during shooting.
Option
On
g
(default setting)
k Off
B
Notes About Vibration Reduction
• After turning on the camera or after switching from playback mode to shooting
mode, wait for the shooting mode screen to be displayed completely before
taking images.
• Images displayed in the camera monitor immediately after shooting may be
displayed blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera
shake in some situations.
Vibration reduction is enabled.
The camera automatically detects the panning
direction and only compensates for vibration caused
by camera shake.
When the camera is panned horizontally, for example,
vibration reduction only reduces vertical shake. If the
camera is panned vertically, vibration reduction only
compensates for horizontal shake.
Vibration reduction is disabled.
Description
E79