Flash Exp. Comp; Noise Reduction Filter - Nikon COOLPIX P7800 Reference Manual

Flash Exp. Comp.

Rotate the mode dial to A, B, C, D, E, F or N M d button M A,
B, C or D tab (A13) M Flash exp. comp.
Adjust the flash output.
Use this option when the flash is too bright or too dark.
Option
+0.3 to +2.0
0.0 (default setting) The flash output is not adjusted.
-0.3 to -2.0
B
Notes About Flash Exp. Comp.
When flash exposure compensation has been set on the optional flash unit the
compensation values on the camera and the Speedlight are added.

Noise Reduction Filter

Rotate the mode dial to A, B, C, D, E, F or N M d button M A, B,
C or D tab (A13) M Noise reduction filter
Set the strength of the noise reduction function that is normally performed
when saving images.
Option
e
High
Normal
M
(default setting)
l Low
E54
The flash output is increased from +0.3 to +2.0 EV, in
increments of 1/3 EV, to make the main subject of the frame
appear brighter.
The flash output is reduced from –0.3 to –2.0 EV, in
increments of 1/3 EV, to prevent unwanted highlights or
reflections.
Performs noise reduction at a level higher than the
standard strength.
Performs noise reduction at the standard strength.
Performs noise reduction at a level lower than the
standard strength.
Description
Description