IBM 2193 User Manual page 161

Table 4: Error codes and messages (Continued)
Error codes Error messages
1783 Secondary slave hard disk fail
8602 PS/2 Mouse error OR no PS/2
mouse present
Note: If any of the errors persist after performing the listed corrective actions, see "Chapter
2. HelpWare support and services" for information on obtaining service.
Corrective actions
1. Load the default settings in Setup.
2. Check the IDE drive jumper.
3. Check the power to the IDE drive.
4. Check the IDE cable/connection.
5. Check the IDE drive.
1. Determine if the mouse is connected
Diagnosing and recovering from problems
properly and is defined correctly in
BIOS Setup.
10-19