Westinghouse VR-5525Z User Manual page 26

Initial Setup (continued)
7. Channel scan select
Press ▲ and ▼ button to select Antenna [ATSC] or Cable, and then press
ENTER button to the next step.
8. ATSC channel access selection
Some of the ATSC channel require the access code.
Press ▲ and ▼ button to select "Next" and then press ENTER button to
next step. The 5 digit access code provided by the channel access service.
Antenna [ATSC] Channel Access
Antenna users need a Channel Access Code in order to perform
a channel scan and receive broadcast signals.
Web: www.westinghousedigital.com/support;
select Channel Access and enter Access Info
Text Message: Text Tuner to 95495
Phone: 1-800-701-0680 follow instructions
Select next to obtain the Access code.
Next
Back
: Return
RSC8-A-_GB_27 Apr 11.indd 25
Scan Channels from Antenna or coaxial cable input
Use the Up or Down key arrows on you remote control to select
the channel scan type.
Antenna [ATSC]
Cable
Back
: Move
: Return
: Move : Press to Execute
: Press to Execute
Antenna [ATSC] Channel Access Information
To access channel scan you will need the following access Info:
Model: VR-5525Z
Serial No.: XXXXXXXXXXXXX
Channel Scan Type: ATSC
Provide these items to Westinghouse's channel access service
by wet, text, or phone to obtain an Access Code, then select
Next to input access code.
Next
Back
: Return
Enter Channel Access Code
Using your remote control to enter the 5 digit access code
provided by the channel access service.
Back
: Enter password
: Return 0-9
: Move : Press to Execute
25 -
2011-4-27 10:55:45