Westinghouse VR-5525Z User Manual page 15

Installing Batteries in the Remote Control Unit
If the remote control fails to operate TV functions, replace the batteries in
the remote control unit.
1. Open the battery cover.
2. Insert two "AA" size batteries (supplied with the
product).
• Place the batteries with their terminals
corresponding to the (+) and (-) indications in the
battery compartment.
3. Close the battery cover.
NOTE:
To use the remote control point it at the TV and press the required buttons.
You must be within 6 meters and at an angle of less than 30 degrees from
the centre of the TV.
CAUTION:
Improper use of batteries can result in chemical leakage or explosion. Be sure
to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have
different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can
shorten the life of new batteries or cause chemical leakage in old batter-
ies.
• Remove batteries as soon as they are worn out. Chemicals that leak
from batteries come in contact with skin can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expect-
ancy due to storage conditions.
• If you will not be using the remote control unit for an extended period
of time, remove batteries from it.
• The batteries (batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
- 14
RSC8-A-_GB_27 Apr 11.indd 14 2011-4-27 10:55:39