Base System Definitions - Intel IP Network server NSI2U Tested Hardware And Operating System List

Base System Definitions

2. Base System Definitions
The following table lists the base system configurations tested for a given validation test run.
Each specific product/system software combination tested is assigned a Base System Identifier
Number. These numbers are used in the lists of supported adapters and peripherals referenced
in the following sections.
The adapters and peripherals specified in this document may or may not have been tested on
all available board/riser combinations that make up the TIGI2U and the NSI2U product family.
However, Intel will provide support for the adapters and peripherals listed when used within this
family of products
This table is updated when a new test run is performed and a new product/system software
combination was used.
Intel will only provide support for adapters and peripherals under the specified
operating systems versions with which they were tested.
Base System
Configuration Product Family
Identifier #
Intel
SE7520JR2 in
1
Intel
SR1400/SR2400
Intel
SE7520JR2 in
2
Intel
SR1400/SR2400
3 Grade Server
4 Grade Server
4 4
BIOS
Revision
®
Server Board
Production
Release
®
Chassis
P07.x
®
Server Board
Production
Release
®
Chassis
P08.x
®
Intel Carrier Production
Release
TIGI2U P08.10
®
Intel Carrier Production
Release
TIGI2U P10
mBMC/BMC
Firmware HSC Firmware Revision
Revision
mBMC FW2.40
IMM BMC FW 32
mBMC FW2.40
IMM BMC FW 46
mBMC FW2.40
IMM BMC FW 48
mBMC FW2.40
IMM BMC FW 48
SCS1 1.06
SATA 1.08
SCS1 1.06
SATA 1.08
SCSI 1.01
SCSI 1.01
Revision 1.3