Table of Contents
Advertisement
To level the doors using the adjustable
lower hinge (select models):
1 Remove all food items from door bins on
door being adjusted.
2 Open doors to 90 degrees.
3 Loosen or remove screw.
LooSen or Remove
Screw
@
Bottom of Door
Loosen/Remove
Screw
(where
applicable)
AdJoU_t_blve
e h_negn
e _hoe_le_ o nly brel_eSre ! after
Lift the door while adjusting the washer.
To raise the door, rotate washer clockwise
(when viewed from the bottom). To lower
door, rotate washer counter-clockwise
(when viewed from the bottom).
po or
€
Raising/Lowering
Door
To adjust
the flipper
mullion:
1 Loosen the screw located on the flipper
mullion hinge.
I
Flipper
"\"
Mullion
Hinge
I!
Adjusting Flipper Mullion
Screw
2 Adjust flipper mullion height. For proper
connection with the flipper mullion guide,
there should be a separation about the
thickness of a coin (0.060 inches, or
1.5 mm) between the guide and flipper
mullion.
,
lion
I
,
Jide
I
Flipper
Mullion
Thickness
of a Coin
c
Adjusting Flipper Mullion
Height
3 Re-tighten screw.
Advertisement
Table of Contents
