Ice Chute Extension (select models)
The ice chute extension is designed to better
direct ice flow into containers.
Installing
the Ice Chute Extension
1 Turn the refrigerator
off using the
button on the control panel (refer to the
"Controls" section of this Manual).
2 Align the extension with the ice chute so
that the snap clips are just inside the front
edge of the chute.
3 Push upward until the extension snaps
into place.
4 Turn your refrigerator
back on.
Removing
the Ice Chute
Extension
For Cleaning
1 Turn the refrigerator
off using the
button on the control panel (refer to the
"Controls"
section of this Manual).
2 Press inward firmly on the front of the
chute and pull down.
3 Turn your refrigerator
back on.
Press Here
Firmly
Pull Down