Cisco 7975G Software Manual page 48

When using the intercom feature, be aware of the following:
• From an intercom line, you can only dial other intercom lines.
• You can use only one intercom line at a time.
• When your active call is being monitored or recorded, you can receive or place intercom calls.
• You cannot place an intercom call on hold.
If you log into the same phone on a daily basis using your Cisco Extension Mobility profile,
Note
ensure that your system administrator assigns the phone button template that contains
intercom information to this profile and assign the phone as the default intercom device for
the intercom line.
If you want to...
Place an intercom call to a
preconfigured intercom target
Place an intercom call to any
intercom number
Receive an intercom call
18
Then...
Press (intercom target line) and, after you hear the
intercom-alert tone, begin speaking.
Press (an intercom line). Enter the intercom target number or
press a speed-dial number for your target. After you hear the
intercom-alert tone, begin speaking.
When you hear the intercom-alert tone, handle the call in one of these
ways:
• Listen to the message in one-way audio.
• Speak to the caller by pressing
• Press EndCall with the intercom call in focus.
(the active intercom line).
OL-22332-01