Using Blf To Determine A Line State - Cisco 7975G Software Manual

If you want to...
Use CallBack to receive
notification when a busy or
ringing extension is available
See if a line associated with a
speed-dial, call record, or
directory listing is busy before
placing a call to that line
Make a priority (precedence)
call (SCCP phones only)
Dial from a Personal Address
Book (PAB) entry
Place a call using a billing or
tracking code
(SCCP phones only)
Place a call using your
Extension Mobility profile
Make a call from a mobile
phone using Mobile
Voice Access
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Then...
1. Press CallBack while listening to the
busy tone or ring sound.
2. Hang up. Your phone alerts you
when the line is free.
3. Place the call again.
When a call is being chaperoned,
Note
a call chaperone cannot use
CallBack.
Look for Busy Line Feature indicators.
Enter the MLPP access number and then
enter a phone number.
1. Choose > Personal
Directory to log in.
2. Choose Personal Address Book and
search for a listing.
1. Dial a number.
2. After the tone, enter a client matter
code (CMC) or a forced
authorization code (FAC).
Log in to the Extension Mobility service
on a phone.
1. Obtain your Mobile Voice Access
number and end-user PIN from your
system administrator.
2. Dial your assigned Mobile Voice
access number.
3. Enter your mobile phone number,
if requested, and the PIN.
4. Press 1 to make a call to an
enterprise IP Phone.
5. Dial a desktop phone number other
than your desktop phone number).
Basic Call Handling
For more information,
see...
Your system
administrator
Using BLF to Determine a
Line State, page 8
Prioritizing Critical Calls,
page 11
Using Personal Directory
on Your Phone, page 4
Your system
administrator
Using Cisco Extension
Mobility, page 12
Managing Business Calls
Using a Single Phone
Number, page 14
3