Above-Floor Cleaning - Shark Navigator Lift-Away Pro NV355 Series Owner's Manual

Above-Floor Cleaning

CLEAN ABOVE THE FLOOR IN UPRIGHT VAC OR
PORTABLE LIFT-AWAY
1 Press the handle release button and pull the
handle up or press the extension wand release
button and pull the extension wand up.
2 Attach desired accessory onto the end of either
the extension wand or the handle. (Fig. 16)
3 Your vacuum has tremendous suction
power. Adjust the amount of suction with
the suction release on the handle. Open
the valve (a) by rotating the collar 90˚
counterclockwise for low suction when
doing light jobs such as drapes or fine
surfaces. Close the valve (a) by rotating the
collar clockwise 90˚ for high suction and
when using the hand held power brush.
(Fig. 16-a)
NV355_NV356E_NV356K_NV357_IB_110714_3.indd 11
a
Fig. 16
Suction
Release Collar
MODE
®
Release suction when
dusting delicate
objects, furniture or
draperies.
4 Press the On/Off switch to the "I" position to turn
the vacuum on for above-floor cleaning.
IMPORTANT: Ensure vacuum is in upright
position. Do not use position "II" when cleaning
above the floor in the upright vac mode as this
will engage the motorized floor brush. The
rotating brush may damage your floor if run for a
prolonged period of time in one area.
www.sharkclean.com
English
11
11-07-20 9:32 AM