Advertisement

WWW.SHARKCLEAN.COM
NV356Q
Owner's Guide

Advertisement

Table of Contents
loading

Summary of Contents for Shark NV356Q

  • Page 1 WWW.SHARKCLEAN.COM NV356Q Owner’s Guide...
  • Page 2 2. K eep the end of the hose and accessory 3. M ake sure accessories are free of blockages. openings away from face and body. GENERAL ELECTRICAL SAFETY: READ ALL INSTRUCTIONS BEFORE USING 4. O nly use filters and accessories provided by 3. K eep cleaning tools and hose suction openings NAVIGATOR ™ 1. U nplug from electrical outlet when not in use YOUR SHARK ® EURO-PRO Operating LLC. [Failure to do so will away from hair, face, fingers, uncovered feet, and before servicing. LIFT-AWAY PRO. ® void the warranty.] or loose clothing.
  • Page 3: Table Of Contents

    Cleaning the Pre-Motor Filters Cleaning the Post-Motor HEPA Filter Cleaning the Power Brush Cleaning the Motorized Floor Brush Checking for Blockages Ordering Parts Troubleshooting Guide Warranty This manual covers model numbers: NV356Q 26 TECHNICAL SPECIFICATIONS Voltage: 120V., 60Hz Watts: 1200W Amps:...
  • Page 4: Getting Started

    Getting Started Your new Shark Navigator Lift-Away Pro vacuum cleaner can easily be configured into ® ™ ® different cleaning modes to meet all your cleaning needs: upright vacuum and portable Lift- - both with constant suction power. Away ® Fig. 1 Fig.
  • Page 5: Mode 1: Upright Vac

    Mode 1: Upright Vac Suction Release Collar T o reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or converting modes. WARNING: The On/Off switch is on the top of the Lift-Away canister. Always ensure the power is OFF ® (“O” position) before plugging and unpluggin Release suction for easier push & pull on high pile carpets and area rugs. Upper Cord Storage Wrap Fig. 12 Fig. 13 TO USE: ently press the floor nozzle down with your foot while you grasp the handle and tilt it back towards R otate the cord release to quickly release the you. (Fig. 13) power cord. NOTE: The rotating brush on the motorized Fig. 9 Fig. 10 S ecure the power cord in the cord hook.
  • Page 6: Mode 2: Portable Lift-Away

    Mode 2: Portable Lift-Away ® Above-Floor Cleaning You can carry your vacuum cleaner in both modes by the carry handle located on top of the dust cup. Release suction when dusting delicate objects, furniture or draperies. Fig. 17 Suction Release Collar Fig. 14 CLEAN ABOVE THE FLOOR IN UPRIGHT VAC OR P ress the On/Off switch to the “I” position to turn PORTABLE LIFT-AWAY MODE the vacuum on for above-floor cleaning. ® Fig. 16 P ress the handle release button and pull the Fig. 15 IMPORTANT: Ensure vacuum is in upright handle up or press the extension wand release position. Do not use position “II” when cleaning button and pull the extension wand up.
  • Page 7: Dust-Away ™ Hard Floor Attachment Use & Care

    Dust-Away Hard Floor Attachment - Use and Care Storage ™ Quick  I MPORTANT: Use only in Cord Release Portable Lift-Away ® mode. Fig. 18 The DustAway™ nozzle has a locking feature which allows Lower Cord you to lock the nozzle Storage Clip Fig. 21 when you do not want Aligning it to swivel. STORE YOUR VACUUM SAFELY C onvert your vacuum back to upright vac mode. R otate the upper quick cord release to its upright CARE FOR PADS position and coil the power cord loosely around W ash the pads separately with warm water...
  • Page 8: Maintenance

    Maintenance COMPONENT MAINTENANCE SCHEDULE Dust Cup Empty each time you vacuum. Pre-Motor Foam Filter Rinse and air dry every 3 months under normal use. Pre-Motor Felt Filter Rinse and air dry every 3 months under normal use. Fig. 26 Post-Motor HEPA Filter Clean once every 2 years or as needed.  I MPORTANT: Loss of Suction may occurif foam filters are not cleaned every 3 months. Rinse and allow to air dry completely. Foam filters may appear dirty after Fig. 29 Fig. 22 use - this is normal. Fig. 23 Pre-Motor Fig. 27 Fig. 28 Foam Filter Felt Filter Screen CLEANING THE POST-MOTOR HEPA FILTER Filter...
  • Page 9: Cleaning The Motorized Floor Brush

    Maintenance - cont’d Rotating Brush Fig. 34 Fig. 31 Fig. 33 Fig. 32 CHECKING FOR BLOCKAGES CLEANING THE MOTORIZED FLOOR BRUSH Blockages may cause your vacuum to overheat and When your motorized floor brush needs cleaning or shut down. To prevent this from happening, check locks onto an object, it automatically shuts down to potential blockage areas after heavy use or if you prevent damage to your lifetime belt. The indicator detect a loss of suction or poor cleaning performance. light will illuminate red warning you to turn off the vacuum and clear blockage immediately. The light will 1 Dust Cup reset itself once blockage has been cleared and power Hose and Connections to Vacuum Motorized Floor Brush D ust cup may be full. Empty dust cup.
  • Page 10: Troubleshooting Guide

    Troubleshooting Guide EURO-PRO FIVE-YEAR (5) LIMITED WARRANTY PROBLEM POSSIBLE REASONS & SOLUTIONS EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of five (5) years from the date of purchase when utilized for normal household use, subject Check filters to see if they need cleaning. Follow instructions for rinsing to the following conditions, exclusions and exceptions. and drying the filters before re-inserting back into the vacuum. (See “Maintenance” sections for instructions.) The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of Vacuum is not Dust cup may be full; empty dust cup. the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply picking up dirt. Check hose and hose connections for blockages; clear blockages if required. to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or If dust cup is empty, and attachment inlets are clear, check for other blockages. (See “Checking for Blockages” for instructions.) mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which Suction is powerful. Take care when vacuuming scatter-type rugs or rugs with have been performed by a repair person not authorized by EURO-PRO Operating LLC. Vacuum lifts scatter rugs delicately sewn edges. Open the suction release on the handle to decrease suction power.
  • Page 11 Copyright © 2011 Euro-Pro Operating LLC Printed in China Illustrations may differ from actual product. NV356Q.E.110929.1...

Table of Contents