Sound Board Removal; Cooling Module Removal; Cpu Removal - Toshiba Tecra 8200 Series Service Manual

FIELD REPLACEABLE UNIT DOCUMENTATION
SPEAKERS & MICROPHONE REMOVAL
Left/Right
speaker
cable
PJ3
Left speaker Rubber holders
1. Lift the strip of glass tape securing the microphone and
speaker cables.
2. Disconnect the speaker cable from PJ961 and the
microphone cable from PJ964 on the sound board.
3. Remove the cables and lift out the speaker assemblies.

COOLING MODULE REMOVAL

M2x10 brass screws
1. Disconnect the fan cable from PJ202 on the system
board.
2. Remove four M2x10 brass screws securing the cooling
module.
3. Lift out the cooling module.
Tecra
8200 Series
Microphone
cable
PJ4
Tape
Right
speaker
Microphone
Cooling
module
Fan cable
PJ202
TOSHIBA
Tough Enough for Today's World.
TM

SOUND BOARD REMOVAL

Sound cable
PJ1
M2.5x4
brass
screws
1. Disconnect the sound cable from PJ407 on the
system board.
2. Remove two M2.5x4 screws securing the sound
board.
3. Lift out the sound board assembly.
4. Disconnect the sound cable from PJ1 on the
sound board.

CPU REMOVAL

CPU
lock
Thermal
conductor
1. Peel off the thermal conductor.
PJ407
Sound board