Connecting A Home Network (Dlna) Server; Selecting The Folders To Play Back - Sharp Aquos LC-80LE857U Operation Manual

Liquid crystal television
Hide thumbs Also See for Aquos LC-80LE857U:
Table of Contents

Advertisement

Enjoying Photo/Music/Video Playback

Connecting a Home Network (DLNA) Server

Connect the TV to the home network (DLNA) server using an ETHERNET cable.
• You can also connect a Home Network (DLNA) server by using a wireless LAN.
ETHERNET cable
Home network (DLNA) server
NOTE
• Do not disconnect a home network (DLNA) server from the TV while transferring files, when a screen is switching to
another or before you exit "Home Network (DLNA)" from the INPUT list.
• Do not connect and disconnect a home network (DLNA) server from the TV repeatedly.

Selecting the Folders to Play Back

• To play back data on a USB memory device, insert
the USB memory device on the TV. USB mode is
selected automatically. (Go to step 2)
• Use the following procedure to switch back to USB
mode after switching from USB mode to another
mode.
1
Select "USB" or "Home Network (DLNA)" from
INPUT list screen.
2
Press D.
3
Press a/b (or c/d) to select the drive/server
where you want to fi nd your fi les, and then press
ENTER.
• For USB mode, select the drive.
• When in DLNA mode, select the server.
Press c/d to select "Photo", "Music" or
4
"Video", and then press ENTER.
Example
5
Press c/d to select the desired folder, and then
press ENTER.
36
Router
NOTE
• The Media screen can be displayed even by using the
application window. To display the application window,
press SmartCentral. (See page 18.)
• You cannot switch the input mode if a USB memory
device is not connected.
• You do not need to select the drive/server in step 3
when there is only one drive in the connected USB
memory device or there is only one home network
(DLNA) server connected to the TV.
• 16 is the maximum number of USB drives and 10 is
the maximum number of home network (DLNA) servers
that can be displayed.
• If the TV is turned off and then on again, the number
assigned to the USB drive may change.
• "VIEW MODE" is fi xed during the Photo or Music
mode. During "Video mode", you can select "Auto" or
"Original".
• The key guide display disappears automatically after a
particular time has elapsed. To display the key guide
display again, press DISPLAY.
USB Device Compatibility
USB
USB Memory, USB card reader (Mass
device
Storage class), USB hard drive
File system
FAT/FAT32/NTFS (USB hard drive only)
Photo fi le
JPEG (.jpg) (DCF2.0 compliant)
format
Multi-Picture Format (.mpo) (CIPA DC-
007 Compliant)
MP Type : Multi view individually image
(stereoscopic view)
Music fi le
MP3 (.mp3)
format
Bitrate: 32k, 40k, 48k, 56k, 64k, 80k,
96k, 112k, 128k, 160k, 192k, 224k,
256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
Video fi le format
File
extension Container
Video
Audio
DivX 3.11/4.x/5.1/6.0
MP3
XviD
Dolby Digital
.avi
AVI
H.264
LPCM
MPEG4
ADPCM
Motion Jpeg
DTS
MP3
DivX 3.11/4.x/5.1/6.0
Dolby Digital
XviD
.mkv
MKV
LPCM
H.264
ADPCM
MPEG4
DTS
DivX 3.11/4.x/5.1/6.0
MP3
XviD
Dolby
.asf
ASF
MPEG4
Digital
.wmv
VC-1
LPCM
Windows Media Video v9
WMA
MP3
H.264
Dolby Digital
.mp4
MP4
MPEG4
Dolby
.mov
(SMP4)
Motion Jpeg
Digital Plus
AAC
Dolby Digital
.mpg
MPEG2
PS
MPEG
.mpeg
MPEG1
LPCM
NOTE
• Progressive format jpeg fi les are not supported.
• USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
• Some video fi le formats may not be played depending
on the fi le.
• Some images may not be displayed in the appropriate
aspect ratio depending on the fi le format.
Home Network (DLNA) Server Compatibility
Photo fi le format
JPEG
Music fi le format
LPCM, MP3
Video fi le format
MPEG2-PS, MPEG2-TS,
WMV, ASF, MP4, MOV, AVI
NOTE
• Progressive format jpeg fi les are not supported.
• Some video fi le formats may not be played depending
on the fi le or the server.
• WMV, ASF, MP4, MOV and AVI are non-DLNA
contents.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents