Single Line Telephones (Figure 6-2); Figure - Samsung DCS-816 Installation Manual

SAMSUNG
DCS-816

6.3 Single Line Telephones (Figure 6-2)

The DCS-816 system has four (4) SLT interfaces to which conventional telephones or OPX lines
can be connected.
connections can be done through the RJ-45 connector on the base board. See Figure 2-3 and
refer to section 2.5 (MDF Cabling).
Use one pair twisted wires and connect each telephone to the SLI port of your choice via the RJ-
45 connector on the base board.
4 PAIR CABLE WITH MALE CONNECTOR TO THE BASE RJ-45 CONNECTOR
CONNECTING SINGLE LINE TELEPHONES
Technical Manuals Online! - http://www.tech-man.com
The system requires MDF connection for single line telephones and all
RJ-45 CONNECTION
PIN COLOUR
1/ 8 W-BL/ BL-W
2/ 7 W-O/ O-W
3/ 6 W-GR/ GR-W
4/ 5 W-BR/ BR-W
NOTE:
UK phones use pin
Connection 2 and 5.
² NO POLARITY
² A LOOP-DISCONNECT FACILITY PER LINE
² CONNECT A CONVENTIONAL TELEPHONE TO
ANY SLI CIRCUIT ON THE BASIC KSU
² TRK 1 AND TRK 2 WILL BE AUTOMATICALLY
TRANSFERRED TO SLI 3 (STN15) AND SLI 4
(STN16) IN CASE OF POWER FAILURE
CIRCUITS / FUNCTIONS
T/R, 1
T/R, 2
T/R, 3
T/R, 4
6-3
Installation
March 1999
st
SLI on base board
nd
SLI on base board
rd
SLI on base board
th
SLI on base board

FIGURE 6-2