Crime Guard 533i4 Operation Manual page 13

features. Once the system is in Programming Mode, a 10 second period
without programming activity will cause the system to automatically exit
Programming Mode. Features can be selected in any order as desired.
To Access Programing Mode and Change Features:
Step 1 Turn the vehicles's ignition on.
Step 2 Turn the ignition off.
Step 3 Within 5 seconds, press and release the Valet Switch 5 times.
•The siren will chirp then sound briefly and the Status Light will
flash to confirm that the system is entering Programing Mode.
•Once in Programming Mode, if 10 seconds of no programming
activity occurs, the system will exit Programming Mode. Pro-
gramming activity is the pressing of the Valet Switch to select a
feature or pressing a transmitter button once a feature is selected.
To Access a Feature:
Step 4 Within 10 seconds, press and release the Valet Switch the same
number of times as the desired feature's number.
• The siren will chirp and the Status Light will flash as many times
as the Valet Switch was pressed to indicate the feature number
which is now accessed.
To Change a Feature:
Step 5 After accessing the desired feature, within 10 seconds press and
release either the transmitter's Upper Left "Lock" Button or its
Upper Right "Unlock" Button.
• Pressing the Upper Left Button turns the feature ON; the siren
will chirp once and the Status Light will turn on.
• Pressing the Upper Right Button turns the feature OFF; the siren
will chirp twice and the Status Light will turn off.
To Access and Change further Features:
Step 6 If there are more features to be programmed, within 10 seconds
of the previous action press and release the Valet Switch the
number of times as the next desired feature's number.
• Again the siren will chirp and the Status Light will flash as many
times as the Valet Switch was pressed to indicate the new
feature number which is now accessed.
• Use the transmitter as described in Step 5 to change the newly
accessed feature as desired.
Page 20
• Silent arming and disarming from the transmitter is for the temporary
suspension only of the confirmation chirps- i.e. for that particular arming
or disarming operation. A programmable feature can turn the chirp con-
confirmation off permanently, should it be desired.
To Activate Auxiliary Channel #2:
Press & Hold the Lower Left Button ( )
Hold 3
seconds
IF THE SYSTEM IS NOT ARMED,
CONFIRMATION IS 1 SIREN CHIRP
AND 1 LIGHT FLASH
IF ARMED, THE SYSTEM
WILL DISARM, WITH
3 SIREN CHIRPS
AND 1 LIGHT
FLASH
To Activate Auxiliary Channel #3:
Press & Hold the Lower Right Button ( )
Hold 3
seconds
CAN OPERATE OPTIONAL
CAR STARTER MODULE
• Auxiliary Channel #2 may be activated anytime, provided the vehicle's
ignition is off. While the ignition is on, the Auxiliary Channel #2 can be
operated as long as a vehicle door is open; this prevents the output from
being accidentally activated while driving.
• If feature #6 is programmed to have the Auxiliary Channel #2 disarm the
system, the doors will unlock when it is activated; and there is an audible
and visual confirmation: 3 siren chirps and one light flash if the system
also disarms, and one chirp and light flash otherwise.
• When Auxiliary Channel #2 is operated, all of the doors will unlock,
even if the vehicle is configured with Driver Door Priority unlocking.
• Auxiliary Channel #3 may be activated at any time, regardless of the
ignition being on or off, and regardless of the security system's status.
• Auxiliary Channel #3 has no audible and/or visual confirmation.
Page 13
(Trunk Release)
for 3 Seconds
TYPICALLY USED FOR
OPTIONAL TRUNK
RELEASE
THE DOORS WILL UNLOCK
for 1 Second
EXAMPLES:
CAN OPERATE OPTIONAL
WINDOW ROLL-UPS