Table of Contents
Advertisement
L I M I T E D
L I F E T I M E
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT,
INC. (the "Company"), are warranted to be free from defects in materials and
workmanship under normal use. If a product sold by the Company proves to be
defective, the Company will repair or replace it free of charge within the first year
and thereafter all parts to be repaired will be free with only a nominal charge for
Omega's labor and return shipping, to the original owner during the lifetime of the
car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega
Research & Development, Inc., P.O. Box 508, Douglasville, Georgia 30133, or
send via UPS to: 981 N. Burnt Hickory Rd., Douglasville, Georgia 30134, with
bill of sale or other dated proof of purchase. This warranty is nontransferable and
does not apply to any product damaged by accident, physical or electrical misuse
BACK COVER
or abuse, improper installation, alteration, any use contrary to its intended
function, unauthorized service, fire, flood, lightning, or other acts of God.
PRINTER'S NOTE:
This warranty limits the Company's liability to the repair or replacement of
the product. The Company shall not be responsible for removal and/or reinstallation
production back cover
charges, damage to or theft of the vehicle or its contents, or any incidental or
consequential damages caused by any failure or alleged failure of the product to
is color; this is a
function properly. UNDER NO CIRCUMSTANCES SHOULD THIS
WARRANTY, OR THE PRODUCT COVERED BY IT, BE CONSTRUED
place marker cover.
AS A GUARANTEE OR INSURANCE POLICY AGAINST LOSS. The
Company neither assumes nor authorizes any person or organization to make any
warranties or assume any liability in connection with the sale, installation, or use
of this product.
This device complies with F.C.C Rules part 15. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference
and, (2) This device must accept any interference that may be received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
Omega Research and Development, Inc.
Douglasville, Georgia
www.caralarm.com
W A R R A N T Y
P. O. Box 508
30133
02/07 MO-CG-650i5
Crime Guard
650i
OPERATION MANUAL
FRONT COVER
PRINTER'S NOTE:
production front cover
is color; this is a
place marker cover.
COPYRIGHT 2007: OMEGA RESEARCH & DEVELOPMENT, INC.
5
Advertisement
Table of Contents
Related Manuals for Crime Guard Crime Guard 650i5
Summary of Contents for Crime Guard Crime Guard 650i5
- Page 1 650i Omega's labor and return shipping, to the original owner during the lifetime of the car in which it was originally installed. All products for warranty repair must be sent postage prepaid to Omega Research &...
-
Page 2: Complete Programmable Features Matrix
#6,243,004 #6,249,216 #6,275,147 #6,297,731 #6,320,514 #6,320,498 24 Unlock Relay Functions Unlock (L) Horn, med (U) Channel 5 (2) Channel 5 Foreign Patent #199700312 #EP0817734B1 #98906445.6 #2,320,248 #701,285 Latch On Demand Omega Research and Development, Inc. www.caralarm.com Page - 2 Page - 31... -
Page 3: Table Of Contents
Feature #23 Lock Relay Functions This Booklet Contains Factory Default Setting Door Lock Output press “arm/lock” button to program Introduction to the System ............. 4-6 Options: press “disarm/unlock” button to program Parking Light Output Transmitter, Status Light, Valet Switch Channel 4 Latch Output press “II”... -
Page 4: Introduction To The System
Crime Guard 650i by Omega Research and Devel- vehicle, they should not be changed except by the original dealer or opment. To enjoy the most from your new system, please take a few moments to qualified installer. -
Page 5: Transmitter, Status Light, Valet Switch System Versatility - An Important Note
Feature #18 Door Activated Anti-Carjacking Protection “II” (or “ ”) Factory Default Setting press “disarm/unlock” button to program • Pressing the “ ” button for two seconds can be used to activate an extra output, press “arm/lock” button to program Option: known as the “2nd channel”, for an optional function such as trunk release. - Page 6 “arm/lock” button to program Option: The Crime Guard 650i is capable of having the optional Omega This feature converts the system into a strictly Remote Keyless Entry System by “Echo” added to it, which would add 2-way control and confirma- eliminating all antitheft alarm-oriented operations and features.
-
Page 7: Using The Crime Guard System
Feature #11 Alarm Duration Using the Crime Guard System Factory Default Setting 30 Seconds Your Crime Guard system is designed to deter theft of both your vehicle and its press “arm/lock” button to program contents. “Arming” your system turns on the protection, disabling the vehicle’s Options: press “disarm/unlock”... -
Page 8: Automatic "Last Door Arming" Of The System
Arming Bypass: Upon arming, if any system sensing circuit is inoperable, Feature #8 Open Door Bypass of Ignition Locking that circuit only will automatically be bypassed. When an unsecured sensing circuit Factory Default Setting press “arm/lock” button to program is in a bypassed state, all other normally operating circuits will be protected. Should press “disarm/unlock”... -
Page 9: While The System Is Armed, And Should It Trigger
While the System is Armed, and should it Trigger Feature #5 Ignition Activated Override press “disarm/unlock” button to program Factory Default Setting While the security system is armed, this is indicated by a slowly flashing Status Option: press “arm/lock” button to program Light. -
Page 10: Disarming The System Using The Transmitter
Feature #2 Last Door Arming Disarming the System Factory Default Setting There are two methods of disarming the Crime Guard: press “arm/lock” button to program 1- The primary method is to use the transmitter by pressing and releasing its Options: “disarm/unlock”... -
Page 11: Safety Disarm Feature; Activation Alert; Automatic Rearming Disarming By Emergency Override
Exit Programming mode: Automatic Rearming Feature: Automatic Rearming is a programmable feature which ensures that your system is never inadvertently disarmed. It is Step 7 Allow 10 seconds to pass without performing any programming possible to accidentally or unknowingly operate the transmitter from a pocket or actions, or turn the vehicle’s ignition on. -
Page 12: Remote Panic Feature
Remote Panic Feature How to Program Features The vehicle ignition key and the Valet Switch are used to enter the Programming Should you feel threatened, or the need to attract attention, you can activate your system's remote “Panic” feature at any time by pressing and holding for 3 seconds Mode, then the transmitter is used to change features. -
Page 13: Other Transmitter Operations
Other Transmitter Operations It is important to note that programmable features affect the exact operation of the system, and that the descriptions of any features To Silently Arm or Disarm the alarm, press and release the “II” button utilized should be used to supplement the basic system operations twice. -
Page 14: Using The Valet Switch
Using the Valet Switch system). When the first transmitter code is learned all existing stored codes will be erased. The Valet Switch may be mounted in a special holder with the Status light, or Step 3 Press the “arm/lock” button on each remaining transmitter. optionally, the installer may have mounted it independently in a hidden, yet The system will chirp the siren once to confirm that each was learned. -
Page 15: Securecode
Transmitter Protection SecureCode The Crime Guard system features several security safeguards in one of the most “SecureCode” allows the user to customize the number of Valet Switch presses vulnerable areas of any remotely controlled system. These features are: which are required to successfully perform an Emergency Override. The basic Emergency Override procedure is described on page 11. -
Page 16: The Status Light
The Status Light Anti-Carjacking Protection The Crime Guard is equipped with three separate Anti-Carjacking protection The Status Light visually confirms the status of the system and provides a high features, whose operation may be selectively activated by the ignition, by an open level of visual deterrence.